DT-50 and DT-50A Tire Changer
9
P/N 5900260 — Rev. A1 — Dec. 2020
Specifications Model DT-50 and DT-50A
Specification
Performance
Motor
110/220 VAC, 50-60 HZ, 1 Ph., 1.1kW
*
Power Cord Length
8 Ft. / 2438 mm
Drive System Type
Electric / Air
Air Requirement
116 – 145 PSI (8 – 10 BAR) at 15-25 CFM
Wheel Clamping Method
4 Clamps – Internal / External
Table Clamping System
Dual Pneumatic Cylinders
Bead Breaking System
Pneumatic Blade
Tower Design
Rigid Fixed / Swing Arm
Assist Tower Design
Swing Arm (Model DT-50A Only)
Rim Size Clamping Min.-Max.
**
12-26 in.
Actual Clamping Diameter Min.-Max.
13.5-27.5 in. / 345-700 mm
Turntable Rim Width Capacity
3 – 15 in / 76 – 381 mm
Bead Breaker Rim Width Capacity
3 – 14 in / 76 – 356 mm
Maximum Tire Diameter
47 in / 1200 mm
Noise
<70 dB
Operating Temperature
+39˚ to +104˚F /+4˚ to +40˚C
Operating Humidity
90% at 20˚C and 50% at 40˚C Non-Condensing
Dimensions
50.78 in. wide by 47.25 in. deep by 76 in. high
1290 mm wide by 1200 mm deep by 1930 mm
high
*
Factory configured for 110 VAC operation; may be switched to 220 VAC. Refer to
for instructions; licensed, certified Electrician required to switch to 220 VAC.
**
Rim size indicates the Bead Seat diameter
not
the outside diameter of the Wheel.
Specifications subject to change without notice.
Summary of Contents for DT-50
