DT-50 and DT-50A Tire Changer
56
P/N 5900260 — Rev. A1 — Dec. 2020
Issue
Action to Take
Loud grinding noise and / or Turntable won’t
turn.
Gearbox failure – replace.
The Turntable Clamps cannot hold a Wheel.
Damaged or worn Clamp Jaws. – replace.
Damaged Air Cylinder – replace.
Replace the Air Cylinder sealing element at the
Turntable.
The Swing Arm Hexagonal Shaft does not
move up and down smoothly.
The shaft locking plate is out of adjustment. Loosen
the bolts of the locking plate and readjust.
The shaft locking plate is worn. Replace the locking
plate.
The Inflation Gauge is not working correctly.
Check the accuracy of the Gauge with a
professional gauge. Fix immediately if the Gauge is
not working correctly.
Air cylinder speed is too slow.
1.
Cut off air and
power to the Tire
Changer.
2.
Remove the side
panel.
3.
Adjust the
silencers A and B
on the valve body
pictured below.
4.
Replace the
silencers if
damaged.
If you continue to have problems with your Tire Changer, visit
Dannmar at (877) 432-6627
.
Summary of Contents for DT-50
