DT-50 and DT-50A Tire Changer
47
P/N 5900260 — Rev. A1 — Dec. 2020
Position the Bead Lifting Tool to the left of the Mount/Demount Head (about 20 percent of the
distance around the Tire), with the Bead Lifting Tool pushing down on the Sidewall of the Tire.
Top view. Not to scale.
When you start rotating the Tire, move the Bead Lifting Tool around as the Tire moves around,
keeping the Tool at the same spot on the Tire.
Press down on the Turntable Foot Pedal to move the Turntable clockwise.
If using the Bead Lifting Tool to hold down the Sidewall starting near the Mount/Demount Head,
move it around with the Tire as it rotates.
If you run into any difficulty as the Tire rotates, take your foot off the Turntable Foot Pedal to stop
the Turntable, then press up on the Turntable Foot Pedal to turn the Turntable counterclockwise.
Make any necessary adjustments and then proceed.
Eventually the top Tire Bead slips under the Rim. How long this takes can vary, based on the Tire
you are mounting.
The Tire is now in place around the Wheel Rim. The next step is to inflate the Tire.
On the DT-50A only, also see
Summary of Contents for DT-50
