DT-50 and DT-50A Tire Changer
29
P/N 5900260 — Rev. A1 — Dec. 2020
Swing Arm
The Swing Arm holds the main Tire Changer tool, the Mount/Demount Head. It swings out of the way
to the right when you do not need it or it is in the way.
Front view. Swing Arm shown fully to the right. Not to scale. Not all components shown.
The main parts of the Swing Arm are:
•
Swing Arm
. When facing forward, puts the Mount/Demount Head directly over the middle of the
Turntable. From that position, the Swing Arm can swing up to 90° to the right, which lets you get it
out of the way when not needed or in the way.
•
Swing Arm Control
. Limits how far the Swing Arm can move back, which lets you position it
exactly when you get it to the desired location. Useful if you are going to be working on multiple
Wheels that are the same size: move the Mount/Demount Head to the desired location, then adjust
the Swing Control so that the Swing Arm returns to this same position if moved out and then back.
•
Mount/Demount Head
. Demounts and mounts Tire Beads.
•
Shaft
. Moves the Mount/Demount Head up and down. Use the Shaft Cap to move the Shaft
down. Do not grab the Shaft itself, it is greased.
•
Shaft Cap
. Moves the Shaft down; it moves back up automatically via the Shaft Spring.
•
Shaft Lock Handle
. Locks the Shaft in position.
•
Shaft Spring
. Automatically moves the Shaft and the Mount/Demount Head back up when you
release the Shaft Lock Handle.
Summary of Contents for DT-50
