DT-50 and DT-50A Tire Changer
38
P/N 5900260 — Rev. A1 — Dec. 2020
Deflate the Tire
You must
fully deflate
a Tire before you can demount it.
⚠
DANGER
Never attempt to demount or mount an
inflated
Tire. They
must
be deflated.
Attempting to demount or mount an inflated Tire could cause it to explode, which
could result in injury or even death.
To deflate a Tire:
If the Valve Stem has a Cap on it, remove the Cap.
Pull the Valve Core out of the Body.
Use a Valve Core Tool to remove the Valve Core. Do not risk damaging the valve core or the stem
by using the wrong tool.
If you are going to use the same Valve Stem with the new Tire you are going to mount, keep the
Valve Core you just took out.
Dannmar recommends installing a new Valve Stem when you mount a Tire.
Make sure all of the air comes out of the Tire.
⚠
WARNING
Do not proceed with any other Tire changing activity until you are certain the Tire is
fully
deflated. Do not demount a Tire until you have made sure the Tire is fully
deflated. In other words, do not take someone’s word for it. If you are demounting
a Tire,
you
must make sure it is
fully
deflated.
Summary of Contents for DT-50
