Danfoss VLT Integrated Servo Drive ISD 510 System, Operating Instructions Manual

Page: 66 / 102

7.2.1 Operating LEDs on the Servo Drive
Illustration 7.1 shows the operating LEDs on the servo
drive.
DRIVE STAT X1
X2
X3
NET STAT
LINK/ACT
DRIVE STAT X1
X2
NET STAT
LINK/ACT
Advanced Standard
130BE677.10
Illustration 7.1 Operating LEDs on the Servo Drive
LED Color Flash status Description
DRIVE
STAT Green On Servo drive is in state
Operation enabled .
Flashing Auxiliary voltage is
applied.
Red On Servo drive is in Fault
or Fault reaction active
state.
Flashing DC-link voltage is not
applied.
NET
STAT Green/
red Fieldbus dependent Network status of the
device (see
corresponding fieldbus
standard).
Link/A
CT X1 Green – Link/activity status of
Hybrid In (X1)
On Ethernet link
established.
Flashing Ethernet link
established and active.
Off No link.
Link/A
CT X2 Green – Link/activity status of
Hybrid Out (X2)
On Ethernet link
established.
Flashing Ethernet link
established and active.
Off No link.
LED Color Flash status Description
Link/A
CT
X3
1)
Green – Link/activity status of
the Ethernet port (X3).
On Ethernet link
established.
Flashing Ethernet link
established and active.
Off No link.
Table 7.3 Legend to Illustration 7.1
1) Advanced version only
7.2.2 Operating LEDs on the Servo Access
Box
Aux 1
Aux 2
Safe 1
Safe 2
130BE733.10
Illustration 7.2 Operating LEDs on the SAB
LED Color Flash status Description
Aux 1 Green – State of the auxiliary
voltage on line 1.
On Statemachine is in
state
Standby , Power
up , or Operation
enabled . Auxiliary
voltage is applied to
the output connectors
on line 1.
Off Statemachine is in
state
U
AUX
disabled or
Fault . Auxiliary voltage
is not applied to line 1.
Operation
VLT
®
Integrated Servo Drive ISD
®
510 System
64 Danfoss A/S © 12/2015 All rights reserved. MG75K102
7 7