5.10.1 Control Cable Routing
Cable routing
Route the cable inside the drive cabinets as shown in
. Wire routing for a 2-drive configuration is identical,
except for the number of drive modules used.
130BE745.11
1
3
5
4
2
1
Microswitch cable
4
44-pin ribbon cable from MDCIC to drive module 4
2
Ferrite core
5
Bracket to support ribbon cable
3
44-pin ribbon cable from MDCIC to drive modules 1 and 2
–
–
Illustration 5.8 Control Cable Routing for a 4-Drive System
Electrical Installation
VLT
®
Parallel Drive Modules
32
Danfoss A/S © 08/2017 All rights reserved.
MG37K302
5
5