manualshive.com logo in svg

Danfoss VLT AQUA Drive FC 202, Design Manual, Page: 15 / 218

Share
Download
Danfoss VLT AQUA Drive FC 202 Design Manual Download Page 15

•

•

•
•
•
•

3.2.7 UkrSEPRO

089

Illustration 3: UkrSEPRO Mark

3.2.8 RCM Mark Compliance

Illustration 4: RCM Mark

3.2.9 Marine Type Approvals

VLT AQUA Drive drives have several marine type approvals. For a list of the approvals and certifications, see the FC 202 product page
at 

www.danfoss.com

.

3.2.10 Moroccan Conformity Mark

Illustration 5: Morocco CMIM Mark

The drive complies with relevant directives and their related standards for the Morocco market.

3.3 Export Control Regulation

AC drives can be subject to regional and/or national export control regulations. Both the EU and USA have regulations for so-called
dual-use products (products for both military and non-military use), which currently includes AC drives with a capacity to operate
600–2000 Hz. These products can still be sold, but it requires a set of measures, for example a license, or an end-user statement.
An ECCN number is used to classify all AC drives that are subject to export control regulations. The ECCN number is provided in the
documentation accompanying the AC drive. If the AC drive is re-exported, it is the responsibility of the exporter to ensure compli-
ance with the relevant export control regulations.
For further information, contact Danfoss Drives Global or the local sales office.

3.4 Enclosure Protection Rating

The VLT® drive series are available in various enclosure protection ratings to accommodate the needs of the application. Enclosure
protection ratings are provided based on 2 international standards:

UL type validates that the enclosures meet NEMA (National Electrical Manufacturers Association) standards. The construction
and testing requirements for enclosures are provided in NEMA Standards Publication 250-2003 and UL 50, 11

th

 edition.

IP (Ingress Protection) ratings outlined by the IEC (International Electrotechnical Commission) in the rest of the world.

The standard Danfoss VLT® drive series are available in various enclosure protections to meet the requirements of IP00 (Chassis),
IP20 (Protected chassis), IP21 (NEMA Type 1), or IP54 (NEMA Type 12). In this manual, NEMA Type is written as Type, for example,
IP21/Type 1.

3.4.1 UL Type Standard

Type 1 – Enclosures constructed for indoor use to provide a degree of protection to personnel against incidental contact with the
enclosed units and to provide a degree of protection against falling dirt.
Type 12 – General-purpose enclosures are intended for use indoors to protect the enclosed units against the following:

Fibers
Lint
Dust and dirt
Light splashing

AJ300847815559en-000101 / 130R0337 | 15

Danfoss A/S © 2020.09

Approvals and Certifications

VLT® AQUA Drive FC 202

Design Guide

Summary of Contents for VLT AQUA Drive FC 202



























































































































































































































Reviews:

No comments