Danfoss iC7 Series, Design Manual, Page: 17 / 150

Design Guide | iC7 Series Air-cooled System Modules
Table 5: Weights of the System Modules
(continued)
Frame No
integratio
n unit [kg
(lb)] Short
integratio
n unit
without
filter,
+AE01 [kg
(lb)] Short
integratio
n unit
with CM
filter,
+AEC1
[kg (lb)] Standard
integratio
n unit
without
filter,
+AE10 [kg
(lb)] Standard
integratio
n unit
with dU/
dt Filter,
+AEU1
[kg (lb)] Standard
integratio
n unit
with dU/
dt and
CM filter,
+AEU2
[kg (lb)] Standard
integratio
n unit
with CM
filter,
+AEC2
[kg (lb)] IP00 [kg
(lb)] IP00 with
an IP54
cooling
channel
[kg (lb)]
AR10 – 72
(158.7) – 78
(172.0) – – – – –
AR11 – 82
(180.8) – 88
(194.0) – – – – –
LCL Filter,
size 10 – – – – – – – 221
(487.2) 251
(553.4)
LCL Filter,
size 11 – – – – – – – 290
(639.3) 349
(769.4)
1) The symbol – in this table means that the value is not applicable.
4.6
Lifting the Product
The weights of system modules and different frames are different. It can be necessary to use a lifting device to move the drive from its
package. For lifting the product, follow these instructions.
1.
Remove the system module from the pallet where it was bolted to.
2.
Use a lifting device that is sufficiently strong for the weight of the system module or filter.
3.
Put the lifting hooks in the lifting loop or lifting hole on top of the product.
Danfoss Drives Oy © 2024.03 AJ389643111587en-000101 / 172F6361A |
17