•
•
•
•
•
4 Mechanical Installation
4.1 Items Supplied
Items supplied can vary according to product configuration.
Make sure that the items supplied and the information on the nameplate correspond to the order confirmation.
Visually check the packaging and the drive for damage caused by inappropriate handling during shipment. File any claim for
damage with the carrier. Retain damaged parts for clarification.
e3
0b
u1
38
.1
1
1
2
3
4
5
6
e3
0b
u1
38
.1
2
Illustration 12: Example of a Product Nameplate for E6h Enclosure (IEC Version on Left, UL Version on Right)
1
Type code
2
Part number and serial number
3
Power rating
4
Input voltage, frequency, and current
5
Output voltage, frequency, and current
6
Discharge time
N O T I C E
WARRANTY
Removing the nameplate from the drive results in loss of warranty.
4.2 Split Shipment
Depending on the options ordered with an enclosed drive, the drive can consist of 5 cabinets and measure 3400 mm (134 in) in
width, which can be difficult to transport and handle. In cases where an enclosed drive exceeds 1800 mm (71 in) in width, the cabi-
nets are separated and shipped in multiple boxes. All necessary fasteners needed for reassembly are provided in the delivery. To
reassemble a split shipment, refer to
4.11 Installing the Enclosed Drive
5.6.1 Connecting Wiring Harnesses
.
4.3 Tools Needed
I-beam and hooks rated to lift the weight of the drive.
Crane or other lifting aid to place the unit into position.
Drill with a 12 mm (1/2 in) drill bit.
AQ262139143212en-000301 / 130R0879 | 39
Danfoss A/S © 2021.10
Mechanical Installation
VLT® AutomationDrive FC 302
Operating Guide
Summary of Contents for D9h
Page 2: ......
