© Danfoss 05-2011
AK-EM 100 Installation Guide
5
RC8BX402
1.2 Site Details
This stage of the process involves the Site Details section, where the address for the local server is added.
This allows the AK-EM 100 to be viewed on a network. The screenshot below contain the default settings
which are all editable.
1. Site Name - Enter the name of the site.
2. IP Address - Enter the IP address where the AK-EM 100 will be situated at.
3. Subnet Mask - Select the submask number.
4. Default Gateway - Enter the address of the default Gateway.
5. Primary DNS - Enter the address of the Primary Domain Name System.
6. Secondary DNS - Enter the address of the Secondary Domain Name System.
When finished, press the ‘Save’ button to store the settings. Once these settings are set up, the Gateway
details can be entered.
When the AK-EM 100’s site details are entered, the next task is to add the Gateways. An AK-EM 100 is
capable of having up to 2 types of gateways attached at any one time. The gateways comprise of:
* ADAP-KOOL®
* System Manager
They can be mixed in any combination, such as having one of each type, or two of one and one of another
etc. This depends entirely on the specification of the store.
When configuring the Gateway Details section for the first time, the settings are always set to the default.
Fields which have a pink background require an entry, otherwise the gateway will not be able to save.
Serial Port set up.
The AK-EM 100 comes with 2 serial ports: Com Port 2 is the modem connection, while Com Port 1 should
be made available for the gateways.
1.3 Gateway Details
