Danfoss AK-EM 100, Configuration Manual

Page: 42 / 54

© Danfoss 05-2011
AK-EM 100 Installation Guide
42 RC8BX402
4.8.3 Making Specific Reports
As HACCP reports are based only on temperature readings, there may be times when you require a HACCP
based report which uses a different type of measurement parameter, such as pressure or volume. Creating
a separate report for this type makes sense as it wouldn’t be right to have it alongside a HACCP report with
temperatures.
1. Make a new Food Type as above in the previous section.
2. Select it from the Food Type drop down list and set the safety threshold levels.
When it comes to reports, select one of the 4 reports. These report titles can be
manually changed in the Report Types section.
3. Once the report name is changed and saved, the Report drop down in the
Food Type section will update to contain the name. Again, points will have to
assigned to the new food type in the Asset Configuration section, as well as
new log points may well have to be created to match the new report.
4. When a HACCP report is now selected , it will contain the new reports alongside that of the default
HACCP report.
4.8.4 Import/Export Food Types
You can export and import the Food Type list as an XML file. This can be a way of easily exporting a list from
a completed site onto a new similar site without having to manually do it from the beginning.
1. Press the Go button in the Export/Import section and then right click on the link when it appears to
save it locally.
2. Similarly, browse to the locally stored copy to upload and update the Food Types.
The Enumerated Type configuration page is where written translations can be entered against parameter
values which signify more than one possible state. For instance, the example,
right , displays a MainSwitch
with 3 possible states with value readings of ‘1’, ‘0’ and ‘-1’. , whereas the written descriptions are ‘Off’,
Regulating‘ and ‘Service’ respectively.
The enumerated descriptions are then selected in the Asset Configuration section (2.1.2) of the
Commission Toolbox, and are available to view in such pages as the Basic and Advanced Asset Details
pages.
1. To add a new enumeration, enter a name in the top text field and press the ‘New’ button. It will then
appear in the list alphabetically.
2. In the blank text boxes of the new enumeration, enter the a value and display name and press the
‘New’ button.
4.9 Enumerated Types
Configuration