[42]
Auto Reset Trip
This event is TRUE if the frequency converter is tripped (but not trip-locked) and an Automatic Reset
is issued.
[43]
OK Key
This event is TRUE if the OK key on the LCP is pressed.
[44]
Reset Key
This event is TRUE if the Reset key on the LCP is pressed.
[45]
Left Key
This event is TRUE if the Left key on the LCP is pressed.
[46]
Right Key
This event is TRUE if the Right key on the LCP is pressed.
[47]
Up Key
This event is TRUE if the Up key on the LCP is pressed.
[48]
Down Key
This event is TRUE if the Down key on the LCP is pressed.
[50]
Comparator 4
Use the result of comparator 4 in the logic rule.
[51]
Comparator 5
Use the result of comparator 5 in the logic rule.
[60]
Logic rule 4
Use the result of logic rule 4 in the logic rule.
[61]
Logic rule 5
Use the result of logic rule 5 in the logic rule.
13-02 Stop Event
Option:
Function:
Select the boolean (TRUE or FALSE) input to deactivate Smart Logic Control.
[0]
False
Enters the fixed value of FALSE in the logic rule.
[1]
True
Enters the fixed value TRUE in the logic rule.
[2]
Running
See parameter group 5-3* for further description.
[3]
In range
See parameter group 5-3* for further description.
[4]
On reference
See parameter group 5-3* for further description.
[5]
Torque limit
See parameter group 5-3* for further description.
[6]
Current limit
See parameter group 5-3* for further description.
[7]
Out of current range
See parameter group 5-3* for further description.
[8]
Below I low
See parameter group 5-3* for further description.
[9]
Above I high
See parameter group 5-3* for further description.
[10]
Out of speed range
[11]
Below speed low
See parameter group 5-3* for further description.
[12]
Above speed high
See parameter group 5-3* for further description.
[13]
Out of feedb. range
See parameter group 5-3* for further description.
[14]
Below feedb. low
See parameter group 5-3* for further description.
[15]
Above feedb. high
See parameter group 5-3* for further description.
[16]
Thermal warning
See parameter group 5-3* for further description.
[17]
Mains out of range
See parameter group 5-3* for further description.
[18]
Reversing
See parameter group 5-3* for further description.
[19]
Warning
See parameter group 5-3* for further description.
[20]
Alarm (trip)
See parameter group 5-3* for further description.
[21]
Alarm (trip lock)
See parameter group 5-3* for further description.
[22]
Comparator 0
Use the result of comparator 0 in the logic rule.
ADAP-KOOL
®
Drive Programming Guide
3 Parameter Description
MG.11.N1.02 - VLT
®
is a registered Danfoss trademark
105
3
