XSL Rigging components
3.8 Z5773 XSL Compression set components
In addition to the XSL Compression frame, the compression set
comprises the following components:
Pos.
Component
and weight
Description
[2]
Z5789
XSL Compression
chain 1.5t.
(10 kg/22 lb)
The compression chain consists of a 7.5 m
(25 ft)/6 mm chain (grade 10) and a
coupling shackle with a corresponding
Locking pin (Type D: 10 x 40 mm). The
shackle allows direct attachment to the
appropriate hole at the bottom rear of the
corresponding load beam.
[3]
B2467.072
Crank lever hoist
(6.7 kg/15 lb)
For XSL line arrays in Compression mode,
the crank lever hoist is used to manually
curve the array.
[4]
B2467.074
Compression frame
master link
(3.5 kg/7.7 lb)
For XSL line arrays in Compression mode,
the compression frame master link is used
to link the B2467.072 lever hoist to the
rear pick point of the XSL Compression
frame.
The link itself consists of an O-ring, one
chain leg including hook for attachment to
the compression frame and a second
chain leg with a corresponding grab link.
Once the array is completely set up and
curved, this second chain leg is used as
secondary safety for the B2467.072 lever
hoist and must be attached to the
compression chain.
[5]
B2447.075
Chain bag
(0.75 kg/1.65 lb)
Once the array is completely set up, the
chain bag is used to store the remaining
compression chain and lever hoist chain.
For this purpose, the chain bag can be
attached to the O-ring of the compression
frame master link using the enclosed chain
link with S-hook.
d&b XSL Rigging manual 1.1 en
- preliminary -
17
