XSL Rigging components
3.4 Z5776 Hoist connector chain 2 t
The Z5776 Hoist connector chain is used to connect the lifting
motor(s) to the shackles of the load beam.
Its length of 535 mm (21") allows enough space for the hang of
most 2 t motor chain containers and avoids any impact on the
vertical balance of the array.
Specification
Lifting chain (DIN EN 818)
1-leg, 8 mm
Grade
8
Nominal length incl. hook
535 mm (21")
Load rating
2 t
3.5 Z5707 SL Aiming plate
Please verify the shipment for completeness and proper condition
of the items.
The Z5707 Aiming plate is equipped and supplied with the
following rigging components:
Pos. Component
Description
[1]
Z5707 SL
Aiming plate
The Z5707 SL Aiming plate is
constructed from high grade steel with
a dead weight of 13.5 kg (29.8 lb).
It is used for the horizontal aiming of
an entire array using two motor hoists.
With a chain hoist distance of
minimum 0.6 m (2 ft), preferably
approx 1 m (3 ft), the SL Aiming plate
provides a horizontal angle range of
±
15° (first and last pick holes of the
load beam used).
[2]
Two 4.75 t shackles are provided to
allow direct connection to the motor
hoist hooks or to attach the Z5706
Hoist connector chain.
[3]
Load hook for attachment to the 4.75 t
shackle of the corresponding SL-Series
load beam or applicable d&b flying
frame.
d&b XSL Rigging manual 1.1 en
- preliminary -
14
