XSL Rigging components
3.2 XSL Load beam
Please verify the shipment for completeness and proper condition
of the items.
The XSLLoad beam is equipped and supplied with the following
rigging components:
Pos. Component
Description
[1]
Z5772 XSL
Load beam
The XSL Load beam is constructed
from high-grade steel with a dead
weight of 11 kg (24 lb).
It is attached on top of the flying frame
to allow either single or dual pickpoint
operation. For this purpose, the load
beam is equipped with a hole grid
consisting of 22 holes with a diameter
of 22 mm (0.85").
[2]
Two 3.25 t shackles are provided to
allow direct connection to the chain
hoist motor hook or to attach the
Z5776 Hoist connector chain and/or
the Z5707 SL Aiming plate.
Instruction labels providing vital safety
and rigging instructions.
Load beam operating modes
The XSL Load beam allow for two operating modes:
STANDARD
MODE
In standard mode, the load beam extends to
the rear. This mode is used for standard array
setup and allows for the required downtilt.
FRONT
EXTENSION
In extension mode, the load beam extends
to the front and allows for the required uptilt.
d&b XSL Rigging manual 1.1 en
- preliminary -
11
