Spyder3 SG-34 GigE Vision Color Manual
69
Teledyne DALSA
03-032-20124-00
Outputs
Ou tp u ts are u sed to control external d evices and m onitor internal sign als.
Step 1
Select the ou tp u t line.
Step 2
Set the Signal Rou ting Block p aram eter. Refer to section ―PLC Inp u t Signal Rou ting Block‖ for m ore d etail
abou t PLC settings.
Important N ote:
Sign als PLC_10 to PLC_15 shou ld not be changed u nless you are
very
exp erienced w ith
triggers an d PLC settings.
Step 3
Set the signal ou tp u t: Q0 to Q3.
Use the looku p table to ou tp u t signals to one of 4 GPIO ou tp u ts.
Figure 53: Output Selector
The sign al to ou tp u t can be selected from the Signal Rou ting Block p aram eters. For exam p le, the follow ing
figu res w ill ou tp u t line 0. Please note that the fram e valid (PLC_A4) is alw ays high sin ce Sp yd er3 is a line scan
cam era.
