Dalsa Piranha HS Series User Manual Download Page 2 | Manualshive

Page: 2 / 123

background image

Piranha HS-xx RoHS User Manual

03-032-20013-03

Teledyne DALSA

2

© 2011 Teled yne DALSA. All inform ation p rovid ed  in this m anu al is believed  to be accu rat e and  reliable.
N o resp onsibility is assu m ed  by Teled yne DALSA for its u se. Teled yne DALSA reserves the right to m ake
changes to this inform ation w ithou t notice. Rep rod u ction of this m anu al in w hole or in p art, by any
m eans, is p rohibited  w ithou t p rior p er m ission having been obtained  from  Teled yne DALSA.

About Teledyne Technologies and Teledyne D ALSA, Inc.

Teled yne Technologies is a lead ing p rovid er of sop histicated electronic su bsystem s, instru m entation and
com m u nication p rod u cts, engineered system s, aerosp ace engines, and energy and p ow er generation
systems. Teledyne Technologies’ operations are primarily located in the United States, the United
Kingdom and Mexico. For more information, visit Teledyne Technologies’ website at www.teledyne.com.

Teled yne DALSA, a Teled yne Technologies com p any, is an international lead er in high p erform ance
d igital im aging and  sem icond u ctors w ith ap p roxim ately 1,000 em p loyees w orld w id e, head qu artered  in
Waterloo, Ontario, Canad a. Established  in 1980, the com p any d esigns, d evelop s, m anu factu res and
m arkets d igital im aging p rod u cts and  solu tions, in ad d ition to p rovid ing MEMS p rod u cts and  services.
For more information, visit Teledyne DALSA’s website at

w w w .teled yned alsa.com

.

Support

For fu rther inform ation not inclu d ed in this m anu al, or for inform ation on Teled yne DALSA’s extensive
line of im age sensing p rod u cts, p lease contact:

N orth America

605 McMu rray Rd
Waterloo, ON N 2V 2E9
Canad a

Tel: 519 886 6000
Fax: 519 886 8023

w w w .teled yned alsa.com

sales.am ericas@teled yned alsa.com
su p p ort@teled yned alsa.com

Europe

Breslau er Str. 34

D-82194 Gröbenzell (Mu nich)

Germ any

Tel: +49 - 8142 – 46770

Fax: +49 - 8142 – 467746

w w w .teled yned alsa.com

sales.eu rop e@teled yned alsa.com
su p p ort@teled yned alsa.com

Asia Pacific

Ikebu ku ro East 13F

3-4-3 H igashi-Ikebu ku ro

Toshim a-ku , Tokyo 170-0013

Jap an

Tel: 81 3 5960 6353

Fax: 81 3 5960 6354 (fax)

w w w .teled yned alsa.com

sales.asia@teled yned alsa.com
su p p ort@teled yned alsa.com

All manuals and user guides at all-guides.com

«
1
2
3
4
...
»

Summary of Contents for Piranha HS Series




























































































































Reviews:

No comments

Related manuals for Piranha HS Series

Brand: Zavio Pages: 31

Brand: Tracker Pages: 18

Brand: Sammix Pages: 7

Brand: Conrad Pages: 10

NO FOUND VFD725W-50P

Brand: ViewSonic Pages: 35

Brand: 70mai Pages: 150

Brand: BZB Gear Pages: 32

Brand: iDule Pages: 38

Brand: Orion Pages: 28

Exilim EX-ZR700

Brand: Casio Pages: 196

Brand: Elinz Pages: 7

Brand: Vivotek Pages: 317

Brand: Laser Pages: 6

Brand: Vava Pages: 3

Brand: GeoVision Pages: 12

25558 - Coolpix S50 7.2MP Digital Camera

Brand: Nikon Pages: 156

Brand: JVC Pages: 2

Brand: Honeywell Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands