FTXS20/25/35/42/50G2V1B
SiBE04-808_B
75
Operation Manual
21
To use ON TIMER
operation
•
1. Press “ON TIMER button”.
is displayed.
blinks.
2.
•
3.
• The TIMER lamp lights up.
4. Press “CANCEL button”.
• The TIMER lamp goes off.
To combine ON TIMER and OFF TIMER
• A sample setting for combining the two timers is shown below.
ATTENTION
In the following cases, set the timer again.
• After a breaker has turned OFF.
• After a power failure.
• After replacing batteries in the remote controller.
Combined
Display
Check that the clock is correct. If not, set
the clock to the present time.
Press “SELECT button” until
the time setting reaches the
point you like.
Every pressing of either button
increases or decreases the time setting
by 10 minutes. Holding down either
button changes the setting rapidly.
Press “ON TIMER button”
again.
To cancel ON TIMER
operation
(Example)
Present time: 23:00
(The unit operating)
OFF TIMER at 0:00
ON TIMER at 14:00
