background image

English

16

5. Operation method

11. DISPOSAL REQUIREMENTS

Your product and the batteries sup-
plied with the controller are marked 
with this symbol. This symbol means 
that electrical and electronic products 
and batteries shall not be mixed with 

unsorted household waste.
For batteries, a chemical symbol can be printed 
beneath the symbol. This chemical symbol means 
that the battery contains a heavy metal above a cer-
tain concentration. Possible chemical symbols are:

 

Pb: lead (>0.004%)

Do not try to dismantle the system yourself: the dis-
mantling of the product, treatment of the refrigerant, 
of oil and of other parts must be done by a qualified 
installer in accordance with relevant local and 
national legislation.
Units and waste batteries must be treated at a spe-
cialized treatment facility for re-use, recycling and 
recovery.
By ensuring correct disposal, you will help to pre-
vent potential negative consequences for the envi-
ronment and human health.
Please contact the installer or local authority for 
more information.

•Screen and the operation 
lamp will blink.
•If a warning occurs, only 
the error icon will blink
and the operation lamp will 
not blink.
•To display the error code and contact infor-
mation, press the Menu/Enter button.
•The error code blinks and the contact 
address and model name will appear.
•Notify your Daikin dealer of the Error code 
and Model name.

Cool

Set to

28

°C

Error : Push Menu Button

Operation 

lamp

Contact Info
0123–4567–8900

Indoor Model 

–––/000

Error Code:A1

Outdoor Model  –––/000

Return

4PEN465376-1.book  Page 16  Wednesday, March 15, 2017  3:03 PM

Summary of Contents for FHA35AVEB





















Reviews: