PIM00411
1-4
CAUTION
●
Please set the pressure and flow rate in the permissible range of the machine. There is a risk of accident
●
Before operation, please set the parameters according to the machine. There is a risk of damage or mechanical
failure.
●
Before operation, please make sure that it can be switched into emergency stop situation at any time. There is
a risk of damage or mechanical failure.
●
When the power failure occurs, the product may suddenly restarts after the power is restored, please do not
stay near the machine. There is a risk of injuries. Please adjust the machine to ensure its safety even restarting
it.
●
If the power is turned off just for a while or the power is being supplied, because the electronic equipment and
heat dissipation fins may be very hot, please do not touch it. There is a risk of burns.
1.4.3
Maintenance and inspection
DANGER
●
Only the qualified personnel can carry out the maintenance and inspection. There is a risk of electrical shock
or injuries.
●
Before operation please make sure the input power supply is OFF. There is a risk of electrical shock.
●
Please make sure the motor is stopped, and the power supply is cut off for five minutes or more. There is a
risk of electrical shock.
●
When the power is being supplied, please do not remove or insert terminals or change wires. There is a risk of
electrical shock, damage or accidents.
CAUTION
●
Please wear gloves and protective goggles when operation.
●
Please do not directly touch the controller board. It may be damaged by static electricity.
●
Please do not do the voltage resistance test. The product may be damaged.
●
Please do not do the megger test for the control circuit. There is a risk of damage.
●
Please do not disassemble this product. There is a risk of electric shock or injuries.
1.4.4
Disposal
CAUTION
●
Please connect the specialized supplier to dispose this product (as a general industrial waste). There is a risk
of environmental pollution by solder (lead), and the like.
