PIM00411
3-2
3.2
Specifications and operating conditions
3.2.1
Product specification
Product type
EHU15R-M0701-30
EHU15R-M0702-30
EHU30R-M0701-30
EHU30R-M0702-30
Maximum operating
pressure
(MPa)
7.0
Maximum flow rate
（
*1
）
(L/min)
15.2
28.5
Operating pressure
adjusting range
(MPa)
0.5~7.0
Operating discharge
rate adjusting range
（
*1
）
(L/min)
2.5 ~ 15.2
3.5 ~ 28.5
Pump capacity
(cm
3
/rev)
4.05
5.70
*1
The maximum flow rate is a theoretical value, not a guaranteed value.
CAUTION
When shipped from the factory, the maximum flow rate was set. [Low pressure (confluence) side flow rate
setting value]
Though the pressure and flow rate can be set beyond the adjustment range, please be sure to use it within the
pressure range and flow rate range.
The high-pressure safety valve is installed in this hydraulic unit, and pressure is set as shown in the following
table. Its setting pressure value is the maximum operating pressure + 0.5MPa (7.5MPa). However, if it is
necessary to minimize the surge pressure of actuator operation, please make adjustments in accordance with
the "13.7 high-pressure safety valve adjustment procedure".
If it continuously operate at the highest pressure, please make sure the flow is less than 5.0L/min.
Please check product specifications (in the format drawing) for other specifications.
