Daikin Altherma 3 H HT EPRA14DAW1, Installer'S Reference Manual

Page: 176 / 260

9 | Configuration
Installer reference guide
176
EPRA14~W1 + ETVH/9W(G)
Daikin Altherma 3 H HT F
4P587502-1A – 2020.01
In menu… You can read out…
[8.6] Operation modes Current operation mode
Example: Defrost/oil return mode
[8.7] About Version information about the system
[8.8] Connection status Information about the connection
status of the unit, the room thermostat
and the LAN adapter.
[8.9] Running hours Running hours of specific system
components
9.5.9 Installer settings
Overview
The following items are listed in the submenu:
9
Installer settings
Commissioning
Information
User settings
User profile
[9] Installer settings
[9.1] Configuration wizard
[9.2]
Domestic hot water
[9.3] Backup heater
[9.5] Emergency
[9.6] Balancing
[9.7] Water pipe freeze prevention
[9.8] Benefit kWh power supply
[9.9] Power consumption control
[9.A] Energy metering
[9.B]
Sensors
[9.C] Bivalent
[9.D] Alarm output
[9.E] Auto restart
[9.F] Power saving function
[9.G] Disable protections
[9.H] Forced defrost
[9.I] Overview field settings
[9.N]
Export MMI settings
Configuration wizard
After first power ON of the system, the user interface will guide you using the
configuration wizard. This way you can set the most important initial settings. This
way the unit will be able to run properly. Afterwards, more detailed settings can be
done via the menu structure if required.
To restart the configuration wizard, go to Installer settings >
Configuration wizard [9.1].