Daikin Altherma 3 H HT EPRA14DAW1, Installer'S Reference Manual

Page: 71 / 260

6 | Unit installation
Installer reference guide
71
EPRA14~W1 + ETVH/9W(G)
Daikin Altherma 3 H HT F
4P587502-1A – 2020.01
6
5
6.4 Mounting the indoor unit
6.4.1 About mounting the indoor unit
Typical workflow
Mounting the indoor unit typically consists of the following stages:
1 Installing the indoor unit.
6.4.2 Precautions when mounting the indoor unit
INFORMATION
Also read the precautions and requirements in the following chapters:
▪
"1 General safety precautions" [ 4 6]
▪
"6.1 Preparing the installation site" [
4
55]
6.4.3 To install the indoor unit
1 Lift the indoor unit from the pallet and place it on the floor. Also see "3.3.3 To
handle the indoor unit" [ 4 21].
2 Connect the drain hose to the drain. See "6.4.4 To connect the drain hose to
the drain" [
4
72].
3 Slide the indoor unit into position.
4 Adjust the height of the leveling feet to compensate for floor irregularities.
The maximum allowed deviation is 1°.
≤1°