Daikin Altherma 3 H HT EPRA14DAW1, Installer'S Reference Manual

Page: 184 / 260

9 | Configuration
Installer reference guide
184
EPRA14~W1 + ETVH/9W(G)
Daikin Altherma 3 H HT F
4P587502-1A – 2020.01
# Code Description
[9.8.2] [D-00] Allow heater : Which heaters are allowed to
operate during preferential kWh rate power
supply?
▪ 0
No
: None
▪ 1 Only BSH : Booster heater only
▪ 2 Only BUH : Backup heater only
▪ 3 All : All heaters
See table below.
Setting 2 is only meaningful if the preferential
kWh rate power supply is of type 1 or indoor unit
is connected to a normal kWh rate power supply
(via X2M/5‑6) and the backup heater is NOT
connected to the preferential kWh rate power
supply.
[9.8.3] [D-05] Allow pump :
▪ 0
No
: Pump is forced off
▪ 1 Yes : No limitation
Do NOT use 1 or 3. Setting [D-00] to 1 or 3 when [D-01] is set to 1 or 2 will reset
[D-00] back to 0, as the system does not have a booster heater. Only set [D-00] to
the values in the table below:
[D‑00] Backup heater Compressor
0 Forced OFF Forced OFF
2 Allowed
Power consumption control
Power consumption control
See "5 Application guidelines" [ 4 27] for detailed information about this
functionality.
# Code Description
[9.9.1] [4-08] Power consumption control :
▪ 0 No : Disabled.
▪ 1 Continuous : Enabled: You can set one
power limitation value (in A or kW) to which
the system power consumption will be
limited for all the time.
▪ 2 Inputs : Enabled: You can set up to four
different power limitation values (in A or kW)
to which the system power consumption will
be limited when the corresponding digital
input asks.
[9.9.2] [4-09] Type :
▪ 0
Amp
: The limitation values are set in A.
▪ 1 kW : The limitation values are set in kW.
Limit when [9.9.1]= Continuous and [9.9.2]= Amp :