Dahua JRC-27F, User Manual

Page: 238 / 415

User's Manual
220
Parameter Description
Repeat Alarm Time
Set repeat alarm time. If the alarm-triggering event continues, an
alarm will be triggered again when repeat alarm time passed.
3) Click OK .
Step 5 Configure alarm schedule and linkage.
Figure 5-134 Schedule and alarm linkage
1) Click .
2) Click Setting next to Schedule to configure the alarm period.
The system performs linkage actions only for alarms during the arming period.
●
On the time line, drag to set the period.
●
You can also click to set the period.
3) Configure alarm linkage. For details, see Table 5-43.
4) Click
Apply
.
Step 6 Click Apply .
5.9.7.2.3 Violence Detection
When the target in the detection region has large body movements such as smashing and fighting,
an alarm will be triggered.
Step 1
Select
Main Menu
>
AI
>
Parameters
>
Stereo Analysis
.
Step 2 Select a channel and then click Add .
Step 3 Select Enable and then set Type to Violence Detection .
Step 4 Draw detection rule.
1) Click
, and then draw a detection area on the video image. Right-click the image to
stop drawing.
2) Configure parameters.