User’s Manual
65
If the code is not valid or entered incorrectly, the operation will not succeed and two beeps
with the text
PWD INVALID
confirm the error. In this case, repeat the operation correctly.
Step 3
Press
to exit.
7.14.3.2 Deleting an Existing Access Code
Access code 1 cannot be deleted.
Step 1
On the
ACCESS CODE
submenu, for example, access code 2, press and hold
for at
least three seconds.
The
NO PRESENT
message is shown to indicate that the access code is deleted.
Step 2
Press
to exit.
A cancelled access code is no longer operational but can be reactivated by a user with an
appropriate authority level such as supervisor.
7.14.3.3 Customizing the Description of Access Code
You can customize the factory default description (access code no.) if needed.
Step 1
On the
NEW CODE
submenu, for example, access code 2, press
+ 2 (F2) to enter the
editing status.
Step 2
Press
and
to move to the position of the description, and then enter the character
by using the specific key (0 to 9).
Step 3
Press
to save the description.
Step 4
Press
to exit from the submenu or press
to continue.
7.15 Date and Time
Step 1
After entering the installer menu, press
and
to scroll up and down until you reach
the
DATE/TIME
menu.
Figure 7-15 Date and time
Step 2
Press
to enter the programming mode.
Step 3
Configure the parameters.
Press
and
to alter the options. Press
to confirm the setting and move to the
next submenu.
Table 7-17 Date and time settings
Submenu
Setting
TIME
Set the time for the controller.
DATE
Set the date for the controller (day/month/year).
Summary of Contents for DHI-ARC3008C
