44
No.
Note
①
Code address, means this operation is to set alarm output
mode, default is 2.
①
Alarm output mode
：
0-auto
，
1-force
，
2-OFF
②
Alarm output no., range is 001
～
064.
Control alarm output
In auto mode, you can enable or disable alarm output.
Operation method: enter [code c[installer password].
001
1
②
①
1
③
No.
Note
①
Code address, means this operation is to control alarm
output, default is 1.
②
Alarm output enable
：
1-enable alarm output
，
0-disable
alarm output
③
Alarm output no., range is 001
～
064.
5.11 View System Status
5.11.1 Zone
You can search zone system status, including zone no., arm/disarm status (arm, disarm, bypass),
alarm status (alarm, non-alarm), zone type (entry/exit, all day, delay. In delay display, front time
is entry delay, and rear time is exit delay).
Operation method: enter [code c[OK]
Note:
Here code command is the zone no., range is 001~256. For example, for zone 1, enter 001.
5.11.2 Host Version
You can view versions of wireless alarm programming keypad and alarm controller.
Operation method: [OK].
Note:
Wireless alarm programming keypad version is shown by letter “K”.
Alarm controller version is shown by letter “F”.
5.11.3 System Time
You can view system time of alarm controller.
Operation method: [OK].
