31
Setup
Note
and call center 1
and call center 1
Step 3. Click OK to save.
4.9 Event Info View
You can view alarm info via WEB or alarm programming keypad,
Via WEB:
Select ALARM>Zone Event, you can view each zone’s arming/disarming info and detector
abnormality.
Figure 4- 18
Via alarm programming keypad:
Long press
key to shoe zone 1~10 alarm info. See below. 00*1234567890 means
zone 1~10 in group 00. If you want to view zone 11~20 alarm info please input 01 here, so forth.
Zone 21~30 is 02; zone 31~40 is 03.
When check box is empty, the zone is normal. When check box is black, the zone is under alarm
status. When check box is B/W, the zone is under source trigger but no alarm output.
00*1 2 3 4 5 6 7 8 9 0
4.10 Network Config
4.10.1 Call Center
You can set call center parameter, when alarm occurs, system will send alarm info to call center.
Warning:
If you want to send alarm info to call center, you must check “call center” when you set
alarm link.
Step 1. Select SETUP>Network>Call Center. See Figure 4- 19.
