Dahua ARC5408C-W, Quick Start Manual

Page: 42 / 52

37
Function
Sub Function
Function
Sub Function
Arm/Disarm
 Arm
 Disarm

Bypass isolate
COM
 Network
 Tel
Zone

Type

Link
Output

Siren

Alarm output
Other

Reset
 Key tone
 Time
 User
 Reboot
Status

Zone

Access control
 Version
 Time
 COM
 Host status
 Output
5.3.3 Prompt Explanation
You may see the following prompt on screen:

Setup failed: Controller setup error.

No right: A user does not have certain right to operate.

Invalid operation: Maybe that version of controller does not match version of al arm
programming keypad.

Reading: It is reading status of controller.

Setting: Controller is responding setup of wireless alarm programming keypad.
5.3.4 User
5.3.4.1 User Right
Different user has different right, see below:
User Type
Code Default
Password Right Note
Administrator 00 123456
 Arm/disarm
 Bypass
isolate
 User
managemen
t
 Reset
controller
First login user please
change your password,
please refer to Ch 5.3.1
and 5.3.4.2.
Operator 01~20
—
 Arm/disarm
 Bypass
isolate

By default, there is no
operator user, you shall
configure operator as
you need, please refer
to ] Ch 5.3.1 and 5.3.4.3.
Installer 21 909090  Set
—
Duress User 22 123457
 Arm/disarm
 Reset
controller
When a duress user
operates, it will send
duress report.
5.3.4.2 M odify Password
Operation method: [Encode command] +[OK]+[Admin password]
Encode command is composed as follows: