14
3 WEB Login and Logout
3.1 Login
Before login, make sure the device is plugged to power and boot up.
Step 1. Open IE and input alarm controller address in the address column. For example, if your
alarm controller IP is 192.168.1.108, then please input http:// 192.168.1.108 in IE address
column. See
Figure 3- 1
.
Figure 3- 1
Note:
Before first login, make sure your PC and the controller are in the same network segment.
Please be aware that the initial IP of device is 192.168.1.108.
When first login, system shows control installation page, you shall follow instructions to install
control unit.
Step 2. Please input your user name and password.
Default factory name is
admin
and password is
admin
.
Step 3.
Select “LAN” or “WAN” as login method.
Note:
The following takes LAN operation as an example.
Step 4. Click Login. System enters WEB homepage.
3.2 Logout
In alarm controller WEB page, select Logout tab to exit.
Note:
You must wait about 1 minute before you can login again.
