32
Figure 4- 19
Step 2. Configure parameters, click OK. See
Parameter
Note
Call Group
By default there are two groups of call, you can select
in the dropdown list.
Center Name
Customize center name.
Center Number
Call center number.
Protocol Type
Use default value, default is CID
Signal Transmission
Mode
Use default, default is DTMF 5/S
Dial Attempts
If call center does not pick up call, it will try this number
of times, range is 1
～
9
Dial Delay
Time interval between two attempts
User Code
Call center provided user code, default is 0000
Step 3. Click OK.
4.10.2 Register
When controller connects to WAN, it will auto report its current position to server specific by user,
to provide convenience for user access.
Step 1. Select SETUP>Network>Register. See Figure 4- 20.
