18
Step 2. By pressing
or
, select arm/disarm, press
.
Step 3. By pressing
or
, select arm, press
.
Step 4. Input user password, press
.
Device has buzzer for twice, means successfully arm.
Quick Disarm
When controller is armed or disarmed with zone alarm triggered, in keypad homepage, input user
password, device has buzzer, means successfully arm.
4.1.4 Wireless Remote Control Disarm
4.1.4.1
Arm
Via wireless remote control you can set all arm, home arm and etc.
Warning:
Wireless remote control must successfully coded before arming/disar ming.
Press arm key on wireless remote control.
Alarm controller has tone prompt, as successfully armed, enter exit count down status, according
to set exit delay, beep once every 1s, and beep twice every 1s during the last 10s; if failed to arm,
device will have tone prompt 3 times. Now you shall check whether there is zone input, and you
can force to arm.
Note:
Please refer to Ch 2.3.2 for wireless remote control.
4.1.4.2
Disarm
Under arming status, press disarm key on wireless remote control, device beeps twice, as
successfully disarmed.
4.2 Add and Delete Wireless Device
Note:
Under arming status, you cannot perform any operation.
Via wireless coding function, manage wireless device, to arm/disarm from wireless device.
Select SETUP>Zone Management>Wireless Code Match.
Figure 4- 3
.
