Dahua Technology DH-XVR1B04-I Manual Download

Page: 249 / 394

User’s Manual

240

Backup



To lock the files to make it unable to be overwritten, select the files, and then click Lock.



To add a mark to the file, select the files and then click Add Mark.

Search by Picture

Select Main Menu > AI > AI Search > Face Recognition > Search by Picture.

Search by picture

Upload face pictures from Face Database or Local Upload.

Maximum 30 pictures can be uploaded at one time, and the system support searching 8
pictures at one time.



Face Database

Summary of Contents for DH-XVR1B04-I











































































































































































































































































































































































































Search results

Summary of Contents for DH-XVR1B04-I

Reviews:

Related manuals for DH-XVR1B04-I

Brands by name

Popular brands

Dahua Technology DH-XVR1B04-I, Manual

Search results

Summary of Contents for DH-XVR1B04-I

Reviews:

Related manuals for DH-XVR1B04-I

Brands by name

Popular brands