background image

 

About This Document 

This document contains instructions for DVR configuration and operation. 

 
 
 

Package Contents 

The package contains the following:

 

 

 

Digital Video Recorder 

 

Power Adaptor and

 

Power Cord 

 

Quick User Guide (This Document) 

 

Software CD (User’s Manual included) 

 

Infrared Remote Control 

 
 
 

Notice 

Specifications are subject to change without prior notice. 

 

The information contained herein is to be considered for reference only. 

 

The software included in this product contains some Open Sources.  You may obtain the complete corresponding 
source code from us.  See the Open Source Guide on the software CD (

OpenSourceGuide\OpenSourceGuide.pdf

). 

 
 
 

Warning 

 

 

WARNING 

RISK OF ELECTRIC SHOCK 

DO NOT OPEN

 

 

 

WARNING:

 TO REDUCE THE RISK OF ELECTRIC SHOCK, 

DO NOT REMOVE COVER (OR BACK). 

NO USER-SERVICEABLE PARTS INSIDE. 

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

 

 

 

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user 
to the presence of uninsulated "dangerous voltage" within the product

s enclosure that may be of 

sufficient magnitude to constitute a risk of electric shock.

 

 

The exclamation point within an equilateral triangle is intended to alert the user to the presence of 
important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

 

Summary of Contents for ED2916























Reviews: