Daewoo Solar 300LC-V, Manual

Page: 566 / 658

S0802220K
Page 12 Electrical System
Operation In Engine Stop Mode
When the starter switch (3) is in the "OFF" position, the electric current flow to the coil of the engine stop
relay (5) is shut off.
As a result, the "30" and "87a" contact point of the engine stop relay are connected and current is supplied
to the engine stop motor from the battery (1)
→
fusible link (2)
→
"B" terminal of engine stop motor (6)
→
"P1" terminal of engine stop motor (6)
→
"87a" terminal of engine stop relay (5)
→
"30" terminal of engine
stop relay (5)
→
"A" terminal of engine stop motor (6)
→
"E" terminal of engine stop motor (6)
→
ground
and the motor is rotated.
The shut off lever of the fuel injection pump, linked to the engine stop motor by a cable, is moved to the
close (pull) position and the engine is stopped. The engine stop motor moves 180° from the running mode
position and is stopped by the internal cam switch which cuts off the current to the motor.
When the starter switch is in the "OFF" position, the internal components of the engine stop motor‘s cam
switch is in the stop mode position.
ENGINE STOP MODE
A
6
A
B
85 86
E
B
P2
P1
A
4
E
5
BR
B
R2
R1
ACC
C
3
START
ON
1
- +
2
- +
0.5G
STARTER SWITCH CONNECTION
P2
P1
A
87
87a
30
PREHEAT
OFF
PST
TML
B BR R1 R2 ACC C
ARS0070L
Figure 7 ENGINE STOP CIRCUIT - STOP MODE
Reference
Number
Description
1 Battery
2 Fusible Link
3 Starter Switch
4 Fuse Box
5 Engine Stop Relay
6 Engine Stop Motor
Reference
Number
Description