Daewoo Solar 300LC-V, Manual

Page: 38 / 658

S0102000
Page 30 Track Excavator Safety
PRECAUTIONS FOR REMOVAL,
INSTALLATION, AND STORAGE OF
ATTACHMENTS
Before starting removal and installation of
attachments, decide the team leader.
Do not allow anyone except the authorized
workers close to the machine or attachment.
Place attachments that have been removed
from the machine in a safe place so that they do
not fall. Put up a fence around the attachments
and take other measures to prevent
unauthorized persons from entering.
PRECAUTIONS WHEN WORKING ON
MACHINE
When carrying out maintenance operations on
the machine, keep the area around your feet
clean and tidy to prevent you from falling.
Always do the following;
• Do not spill oil or grease.
• Do not leave tools laying about.
• Watch your step when walking.
Never jump down from the machine. When
getting on or off the machine, use the steps and
handrails, and maintain a three-point contact
(both feet and one hand or both hands and one
foot) to support yourself securely.
If the job requires it, wear protective clothing.
To prevent injury from slipping or falling, when
working on the hood or covers, never use any
part except the inspection passage fitted with
non-slip pads.
LOCK INSPECTION COVERS
When carrying out maintenance with the inspection cover open, lock the cover securely in position with the
lock bar.
If maintenance work is carried out with the inspection cover open but not locked, there is danger that it may
suddenly close and cause injury if there is a gust of wind.
HDO1041L
Figure 33
ARO1380L
Figure 34