Daewoo Solar 300LC-V, Manual

Page: 176 / 658

S0505000
Page 10 Track Assembly
TRACK SHOES AND LINKS
TRACK REMOVAL
1. Position machine on a smooth level
surface with adequate room for forward
and reverse travel.
2. Relieve track tension. Refer to "Track
Tension" in this section for procedure.
3. Move machine until master link (1, Figure
13) is positioned at approximately 10
o’clock from top position on travel
reduction gearbox.
4. Remove four nuts and bolts (2, Figure 13)
holding shoe to link. Remove enough
shoes to make access to lock pin easier.
NOTE: Support track shoes with
blocking so that when master
pin (4, Figure 13) is removed
tack will not fall.
5. Straighten lock pin (3, Figure 13) and
remove it from master pin (4). Discard lock
pin.
6. Remove master pin from master links.
7. Move unit forward until entire track is laying
on ground.
NOTE: Do not drive unit off track.
Figure 13
HAOV100L
Figure 14