1-1
1. GENERAL INFORMATION
SERVICE INFORMATION
·
··
··
··
··
··
··
·
1-1
SERVICE RULES
·
··
··
··
··
··
··
··
··
··
·
1-1
CAUTION WHEN WIRING
·
··
··
··
··
·
1-5
MODEL IDENTIFICATION
·
··
··
··
··
·
1-9
SPECIFICATIONS
·
··
··
··
··
··
··
··
··
·
1-10
TORQUE VALUES
·
··
··
··
··
··
··
··
··
·
1-12
SYMBOLS / ABBREVIATIONS
·
··
··
·
1-14
TOOLS
·
··
··
··
··
··
··
··
··
··
··
··
··
··
·
1-15
WIRING DIAGRAM
·
··
··
··
··
··
··
··
·
1-16
SERVICE INFORMATION
1. Do not run the engine for a long time in closed or not well-ventilated area because the exhaust gas contains toxic
substances such as carbon monoxide, hydrocarbon, nitric oxide.
2. The battery fluid(lean sulfuric acid) is extremely toxic. It is dangerous if skin is exposed to it or if it enters into the eye.
Be careful in handling. When exposed to the battery fluid, wash it with water and get a medical check up.(store the
battery fluid in a safe place to avoid touching by the children)
3. Pay attention not to be burned and always put on the protection gears because the engine or the muffler is hot right after
engine stops.
4. Gasoline is extremely flammable. Maintenance must be performed in the place free of the open fire or electric spark.
5. When more than two person are working, always pay attention to other worker’s action and always have safety in mind.
6. The skin exposed to used engine oil can be a major reason of the skin cancer. Pay attention not to be exposed and wash
carefully with soap and water after handling.
7. If compressed air is used to clean the brake, dust scattered in the air can be breathed in by workers. Please take action not
to scatter dust in the brake cleaner, etc.
8. Flammable nitrogen gas is generated during charging the battery so charging must be performed in well-ventilated area
and free of the open fire and spark.
SERVICE RULES
1. Parts and lubrication oil must be DAELIM genuine or
recommended parts.
2. Before maintenance, remove deposit or dust from the
chasis.
1
Summary of Contents for Roadwin 250R FI VJF125
