Daedong DSC48, Workshop Manual

Page: 26 / 290

0
-20 Apr. 2007
DSC48
9. LOADING AND UNLOADING THE COMBINE HARVESTER TO THE TRANSPORTING VEHICLE
You must follow Accident occurred when not followed!
„ Use ramps that are strong, wide and long (4 times long
as the height of the cargo bed of the vehicle) enough
and have anti-slippery hooks.
• Use wide ramps so that the wheels cannot fall off the
ramps.
The ramps can be broken and the combine harvester can
roll over.
417W134A
„ Ensure the ramps are straightly lined up with the cargo
bed of the transporting vehicle.
• Ensure the ramps are straightly lined up and have a
proper distance between them based upon the wheel
base distance.
• Ensure that the hooks on the ramps are securely
engaged.
The combine harvester can lose balance and overturn.
417W135A
„ Drive the combine harvester backward to load it up to
the transporting vehicle. Move forward to unload the
combine harvester from the vehicle.
• Have the assistant help your driving.
• Do not allow anyone, especially children, to come
near the combine harvester.
• Make sure that the brake pedal is engaged.
• Do not operate the lever on the ramps when it is un-
necessary.
Do not turn the combine harvester. Otherwise, it may lose
balance and roll over.
417W136A
„
When loading or unloading the combine harvester on
the transporting vehicle, pay attention to the four direc-
tions, horizontality and safety of the combine harvester
and stay on a low speed lane.
The combine harvester can slip off the ramps even if the
brake pedal is depressed.
417W137A