DAB E.sybox 30, Instruction For Installation And Maintenance

Page: 63 / 934

ENGLISH
60
GB
charge of plant safety, authorizing them to perform all the neces
-
sary activities, during which they are able to recognize and avoid
all dangers. (Definition for technical personnel IEC 364).
The appliance is not intended to be used by persons (including
children) with reduced physical, sensory or mental capacities, or
who lack experience or knowledge, unless, through the media
-
tion of a person responsible for their safety, they have had the
benefit of supervision or of instructions on the use of the appli
-
ance. Children must be supervised to ensure that they do not
play with the appliance.
Safety
Use is allowed only if the electric system is in possession of safe
-
ty precautions in accordance with the regulations in force in the
country where the product is installed (for Italy CEI 64/2).
Pumped liquids
The machine has been designed and made for pumping water,
free from explosive substances and solid particles or fibres, with
a density of 1000 Kg/m³, a kinematic viscosity of 1mm²/s and
non chemically aggressive liquids.
The power supply cable must never be used to carry or shift the
pump.
Never pull on the cable to detach the plug from the socket.
If the power cable is damaged, it must be replaced by the manu
-
facturer or by their authorised technical assistance service, so as
to avoid any risk.
Failure to observe the warnings may create situations of risk for persons
or property and will void the product guarantee.
KEY
The following symbols have been used in the discussion:
S
ituation of general danger. Failure to respect the instruc
-
tions that follow may cause harm to persons and property.
Situation of electric shock hazard. Failure to respect the
instructions that follow may cause a situation of grave risk for
personal safety.
Notes
WARNINGS
This manual refers to e.sybox and e.sybox 30/50 products. In the follow
-
ing discussion, the term e.sybox will be used when the characteristics are
shared by both models. If the characteristics differ, the models and their
differences will be specified.
R
ead this documentation carefully before installation.
Installation and operation must comply with the local safety reg
-
ulations in force in the country in which the product is installed.
Everything must be done in a workmanlike manner.
Failure to respect the safety regulations not only causes risk to
personal safety and damage to the equipment, but invalidates
every right to assistance under guarantee.
Skilled personnel
I
t is advisable that installation be carried out by competent,
skilled personnel in possession of the technical qualifications re
-
quired by the specific legislation in force.
The term skilled personnel means persons whose training, ex
-
perience and instruction, as well as their knowledge of the re
-
spective standards and requirements for accident prevention
and working conditions, have been approved by the person in