xStack
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
58
Example usage:
To configure the Switch contact to “MIS Department II”:
DGS-3627:5#config snmp system_contact MIS Department II
Command: config snmp system_contact MIS Department II
Success.
DGS-3627:5#
config snmp system_location
Purpose
Used to enter a description of the location of the Switch.
Syntax
config snmp system_location <sw_location>
Description The
config snmp system_location
command is used to enter a
description of the location of the Switch. A maximum of 255
characters can be used.
Parameters
<sw_location>
– A maximum of 255 characters is allowed.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example usage:
To configure the Switch location for “HQ 5F”:
DGS-3627:5#config snmp system_location HQ 5F
Command: config snmp system_location HQ 5F
Success.
DGS-3627:5#
config snmp system_name
Purpose
Used to configure the name for the Switch.
Syntax
config snmp system_name <sw_name>
Description The
config snmp system_name
command configures the name of
the Switch.
Parameters
<sw_name>
– A maximum of 255 characters is allowed.
Restrictions
Only Administrator and Operator-level users can issue this
command.
Example usage:
To configure the Switch name for “DGS-3600 Switch
”:
DGS-3627:5#config snmp system_name DGS-3600 Switch
Command: config snmp system_name DGS-3600 Switch
Success.
DGS-3627:5#
