xStack
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
121
To show 802.1p user priority:
DGS-3627:5#show 802.1p user_priority
Command: show 802.1p user_priority
QOS Class of Traffic
Priority-0 -> <Class-2>
Priority-1 -> <Class-0>
Priority-2 -> <Class-1>
Priority-3 -> <Class-3>
Priority-4 -> <Class-4>
Priority-5 -> <Class-5>
Priority-6 -> <Class-6>
Priority-7 -> <Class-6>
DGS-3627:5#
config 802.1p default_priority
Purpose
Used to configure the 802.1p default priority settings on the Switch. If
an untagged packet is received by the Switch, the priority configured
with this command will be written to the packet’s priority field.
Syntax
config 802.1p default_priority [<portlist> | all] <priority 0-7>
Description
This command allows users to specify default priority handling of
untagged packets received by the Switch. The priority value entered
with this command will be used to determine to which of the seven
hardware priority queues the packet is forwarded.
Parameters
<portlist>
−
Specifies a port or range of ports to be configured. The
beginning and end of the port list range are separated by a dash.
all
−
Specifies that the command applies to all ports on the Switch.
<priority 0-7>
−
The priority value to assign to untagged packets
received by the Switch or a range of ports on the Switch.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example usage:
To configure 802.1p default priority on the Switch:
DGS-3627:5#config 802.1p default_priority all 5
Command: config 802.1p default_priority all 5
Success.
DGS-3627:5#
