xStack
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
26
To restart auto negotiation for ports 1-3:
DGS-3627:5#config ports 1:1-1:3 auto_negotiation restart_an
Command: config ports 1:1-1:3 auto_negotiation restart_an
Success.
DGS-3627:5#
show ports
Purpose
Used to display the current configuration of a range of ports.
Syntax
show ports { <portlist> } { [description | err_disabled | auto_negotiation]}
Description
This command is used to display the current configuration of a range of ports.
Parameters
<portlist>
−
Specifies a port or range of ports to be displayed. The beginning and
end of the port list range are separated by a dash.
{description}
– Adding this parameter to the show ports command indicates that a
previously entered port description will be included in the display.
err_disabled
– Choosing this parameter will display ports that have been
disconnected due to an error on the port, such as a Loopback Detection.
auto_negoriation – Choosing this parameter will display the port auto-negotiation
information in the display.
Restrictions None.
