xStack
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
263
DGS-3627:5#config access_profile profile_id 4 add access_id 1 ipv6
class 1 flowlabel 0xABCD port 4 deny
Command: config access_profile profile_id 4 add access_id 1 ipv6 class
1 flowlabel 0xABCD port 4 deny
Success.
DGS-3627:5#
delete access_profile
Purpose
Used to delete a previously created access profile.
Syntax
delete access_profile [profile_id <value 1-14> | all]
Description The
delete access_profile
command is used to delete a previously created
access profile on the Switch.
Parameters
profile_id <value 1-14>
−
Enter an integer between
1
and
14
that is used to
identify the access profile that will be deleted with this command. This value
is assigned to the access profile when it is created with the
create
access_profile
command.
all
– Use this parameter to delete all created access profiles on the Switch.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example usage:
To delete the access profile with a profile ID of 1:
DGS-3400:4# delete access_profile profile_id 1
Command: delete access_profile profile_id 1
Success.
DGS-3400:4#
show access_profile
Purpose
Used to display the currently configured access profiles on the Switch.
Syntax
show access_profile {profile_id <value 1-14>}
Description
The
show access_profile
command is used to display the currently
configured access profiles.
Parameters
profile_id <value 1-14>
−
Enter an integer between
1
and
14
that is used to
identify the access profile that will be viewed with this command. This value is
assigned to the access profile when it is created with the
create
access_profile
command.
Entering this command without the
profile_id
parameter will command the
Switch to display all access profile entries.
Restrictions None.
Example usage:
To display all of the currently configured access profiles on the Switch:
