xStack
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
115
show traffic control
Purpose
Used to display current traffic control settings.
Syntax
show traffic control {<portlist>}
Description
This command displays the current storm traffic control configuration on
the Switch.
Parameters
<portlist>
−
Specify a range of ports to display. The beginning and end of
the port list range are separated by a dash
Restrictions None.
Example usage:
To display traffic control setting:
DGS-3627:5#show traffic control
Command: show traffic control
Traffic Storm Control Trap :[None]
Port Thres Broadcast Multicast Unicast Action Count Time Shutdown
hold Storm Storm Storm down Interval Forever
---- ------ --------- --------- -------- -------- ----- -------- --------
1:1 131072 Enabled Disabled Disabled drop 0 5
1:2 131072 Enabled Disabled Disabled drop 0 5
1:3 131072 Disabled Disabled Disabled drop 0 5
1:4 131072 Disabled Disabled Disabled drop 0 5
1:5 131072 Disabled Disabled Disabled drop 0 5
1:6 131072 Disabled Disabled Disabled drop 0 5
1:7 131072 Disabled Disabled Disabled drop 0 5
1:8 131072 Disabled Disabled Disabled drop 0 5
1:9 131072 Disabled Disabled Disabled drop 0 5
1:10 131072 Disabled Disabled Disabled drop 0 5
1:11 131072 Disabled Disabled Disabled drop 0 5
1:12 131072 Disabled Disabled Disabled drop 0 5
1:13 131072 Disabled Disabled Disabled drop 0 5
1:14 131072 Disabled Disabled Disabled drop 0 5
1:15 131072 Disabled Disabled Disabled drop 0 5
1:16 131072 Disabled Disabled Disabled drop 0 5
CTRL+C
ESC
q
Quit
SPACE
n
Next Page
Enter
Next Entry
a
All