xStack
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
365
DGS-3627:5#show ospf host_route
Command: show ospf host_route
Host Address Metric Area_ID
--------------- --------------- -----------
10.48.73.21 2 10.1.1.1
10.48.74.122 1 10.1.1.1
Total Entries: 2
DGS-3627:5#
create ospf aggregation
Purpose
Used to configure OSPF area aggregation settings.
Syntax
create ospf aggregation <area_id> <network_address> lsdb_type
[summary {advertise [enable | disable]} | nssa_ext {advertise [enable
| disable]}]
Description
This command is used to create an OSPF area aggregation.
Parameters
<area_id>
−
A 32-bit number in the form of an IP address
(xxx.xxx.xxx.xxx) that uniquely identifies the OSPF area in the OSPF
domain.
<network_address>
−
The 32-bit number in the form of an IP address that
uniquely identifies the network that corresponds to the OSPF Area.
lsdb_type
−
The type of address aggregation. The user has two choices
for the LSDB type:
•
summary
– Choosing this LSDB type will summarize routes that
are entering the OSPF area by redistribution.
•
advertise [enable | disable]
−
Allows for the advertisement
trigger to be enabled or disabled.
•
nssa_ext
– Choosing this LSDB type will summarize routes that
are entering the OSPF NSSA from an external source.
•
advertise [enable | disable]
−
Allows for the advertisement
trigger to be enabled or disabled.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example usage:
To create an OSPF area aggregation:
DGS-3627:5#create ospf aggregation 10.1.1.1 10.48.76.122/16 lsdb_type
summary advertise enable
Command: create ospf aggregation 10.1.1.1 10.48.76.122/16 lsdb_type
summary advertise enable
Success.
DGS-3627:5#
