xStack
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
53
DGS-3627:5#show snmp host
Command: show snmp host
SNMP Host Table
Host IP Address SNMP Version Community Name / SNMPv3 User Name
---------------- -------------- ---------------------------------
10.48.76.23 V2c private
10.48.74.100 V3 authpriv public
Total Entries: 2
DGS-3627:5#
show snmp v6host
Purpose
Used to display the IPv6 recipient of SNMP traps generated by the
Switch’s SNMP agent.
Syntax
show snmp v6host {<ipv6addr>}
Description The
show snmp v6host
command is used to display the IPv6
addresses and configuration information of remote SNMP managers
that are designated as recipients of SNMP traps that are generated by
the Switch’s SNMP agent.
Parameters
v6host <ipv6addr>
−
The IPv6 address of a remote SNMP manager
that will receive SNMP traps generated by the Switch’s SNMP agent.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example usage:
To display the currently configured IPv6 SNMP hosts on the Switch:
DGS-3627:5#show snmp v6host
Command: show snmp v6host
SNMP Host Table
-----------------------------------------------------------
Host IPv6 Address : FF::FF
SNMP Version : V3 na/np
CommunityName/SNMPv3 User Name : initial
Total Entries: 1
DGS-3627:5#
