xStack
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
463
show mac_based_access_control
Purpose
Used to display the MAC-based access control setting.
Syntax
show mac_based_access_control {ports [<portlist> | all]}
Description The
show mac_based_access_control
command is used to display the
MAC-based access control setting.
Parameters
ports
– Display the MAC-based access control port state.
Restrictions None.
Example usage
To show MAC-based access control:
DGS-3627:5# show mac_based_access_control
Command: show mac_based_access_control
MAC Based Access Control
------------------------------------
State : Enabled
Method : Local
Password : default
Guest VLAN : RG
Guest VLAN VID : 409
Guest VLAN Member Ports: 1:1-1:8
DGS-3627:5#
To show MAC-based access control port:
DGS-3627:5#show mac_based_access_control ports 1-9
Command: show mac_based_access_control ports 1:1-1:9
Port State Aging Time Hold Time Auth Mode
(mins) (secs)
------ -------- ---------- --------- ----------
1:1 Enabled 1440 300 Host_based
1:2 Enabled 1440 300 Host_based
1:3 Enabled 1440 300 Host_based
1:4 Enabled 1440 300 Host_based
1:5 Enabled 1440 300 Host_based
1:6 Enabled 1440 300 Host_based
1:7 Enabled 1440 300 Host_based
1:8 Enabled 1440 300 Host_based
1:9 Disabled 1440 300 Host_based
DGS-3627:5#
