![D-Link xStack DGS-3612G series Cli Manual Download Page 445](http://html1.mh-extra.com/html/d-link/xstack-dgs-3612g-series/xstack-dgs-3612g-series_cli-manual_3519854445.webp)
xStack
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
442
show sim
MAC Address – Displays the MAC Address of the Switch.
Capabilities – Displays the type of switch, be it Layer 2 (L2) or Layer
3 (L3).
Platform – Switch Description including name and model number.
SIM State –Displays the current Single IP Management State of the
Switch, whether it be enabled or disabled.
Role State – Displays the current role the Switch is taking, including
Commander, Member or Candidate. A Stand-alone switch will always
have the commander role.
Discovery Interval – Time in seconds the Switch will send discovery
packets out over the network.
Hold time – Displays the time in seconds the Switch will hold
discovery results before dropping it or utilizing it.
Parameters
candidates <candidate_id 1-100>
– Entering this parameter will
display information concerning candidates of the SIM group. To view
a specific candidate, include that candidate’s ID number, listed from
1
to
100
.
members <member_id 1-32>
– Entering this parameter will display
information concerning members of the SIM group. To view a specific
member, include that member’s id number, listed from
1
to
32
.
group {commander_mac <macaddr>}
– Entering this parameter will
display information concerning the SIM group. To view a specific
group, include the commander’s MAC address of the group.
neighbor
– Entering this parameter will display neighboring devices of
the Switch. A SIM neighbor is defined as a switch that is physically
connected to the Switch but is not part of the SIM group. This screen
will produce the following results:
•
Port – Displays the physical port number of the commander
switch where the uplink to the neighbor switch is located.
•
MAC Address – Displays the MAC Address of the neighbor
switch.
•
Role – Displays the role(CS, CaS, MS) of the neighbor
switch.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example usage:
To show the SIM information in detail:
DGS-3627:5#show sim
Command: show sim
SIM Version : VER-1.61
Firmware Version : 2.50.B09
Device Name :
MAC Address : 00-19-5B-F5-26-C0
Capabilities : L3
Platform : DGS-3627 L3 Switch
SIM State : Disabled
Role State : Candidate
Discovery Interval : 30 sec
Holdtime : 100 sec
DGS-3627:5#